OZ ARMOUR 3-Frame Electric Honey Extractor

Hands-Free Harvesting at a Hobbyist-Friendly Price

Cranking a manual extractor for an afternoon is a rite of passage for new beekeepers, but it doesn't take long to realise it's the hardest part of beekeeping: sore shoulders, blistered hands, and the temptation to under-spin just to get it over with. The OZ ARMOUR 3-Frame Electric Honey Extractor turns harvest day into a smooth, hands-free process. Flip the switch, control the speed, and watch through the transparent lid.

Built from premium SS 304 food-grade stainless steel, with a 220V electric motor, variable speed control, unbreakable transparent lid, and base-level honey gate. It's the most affordable electric extractor in our OZ ARMOUR range, backed by a 2-year warranty.

Why Upgrade From Manual to Electric?

The motor does all the work, no cranking fatigue, with consistent extraction speeds that pull more honey from each frame than a tired human cranking. Less fatigue means faster harvest cycles, more frequent harvesting, and honestly, harvest day stops being something you dread.

Why SS 304 Steel Matters

SS 304 is the gold standard for food-contact equipment used in commercial honey processing and dairy plants. It resists corrosion from honey's mild acidity, adds no metallic taste, and stays smooth and hygienic for years. The 0.50mm-thick body stays rigid and rattle-free even at full speed.

Variable Speed Control

Start low to protect delicate fresh wax foundation, then ramp up as honey flows, running full speed for thorough extraction. Thicker honeys like ironbark benefit from higher sustained speeds, while delicate spring honeys need gentler handling, exactly what fixed-speed extractors can't offer.

Tangential Extraction

Frames load with their flat face parallel to the drum, extracting one side, then the other after flipping. This preserves the comb for bees to refill next season and works at lower, quieter speeds with less motor wear, the right design for hobbyists and small commercial operators.

How Long Does Extraction Take?

Roughly 10 to 15 minutes per batch of 3 frames. A hobbyist with 5 to 10 hives can extract a full season's harvest in a single evening.

Cleaning

Drain through the base gate, rinse with warm water (never above 50°C), wipe down, and air dry. The non-stick SS 304 surface has no crevices for residue to hide in.

Specifications

• Capacity: 3 full-depth frames
• Material: SS 304 food-grade stainless steel, 0.50mm thick
• Extraction design: Tangential, preserves comb for reuse
• Motor: 220V electric, variable speed control
• Lid: Unbreakable transparent
• Honey gate: Stainless steel, base-level
• Power: Standard Australian 220V outlet
• Warranty: 2-year manufacturer warranty
• Rating: 4.9/5 stars

How many frames does this extractor hold?

It holds 3 full-depth frames per batch, extracting each in roughly 10 to 15 minutes including flipping frames for the second side.

What material is the extractor made from?

It's built from SS 304 food-grade stainless steel, 0.50mm thick, the same alloy used in commercial honey processing plants.

Is this a tangential or radial extractor?

Tangential. Frames load with their flat face parallel to the drum, extracting one side at a time, which preserves the comb for bees to reuse.

Why does variable speed control matter?

It lets you start slow to protect delicate wax foundation, then increase speed as honey flows, adjusting for thinner or thicker honey types.

What power supply does it need?

It runs on a standard Australian 220V household outlet with no special wiring required, powered by a 220V electric motor.

How long does a full harvest take?

Roughly 10 to 15 minutes per batch of 3 frames, meaning a hobbyist with 5 to 10 hives can extract a full season's harvest in one evening.

How do I clean the extractor after use?

Drain honey through the base gate, rinse with warm water under 50°C, wipe down if needed, and air dry fully before storing.

Does it come with a warranty?

Yes, it's backed by a 2-year manufacturer warranty covering manufacturing defects, motor failures, and structural issues.

Is this suitable for commercial beekeeping?

It suits hobbyists and small operations with 3 to 10 hives. Beekeepers running 30+ hives should consider the 8-frame electric flagship instead.

Can I see this extractor in person before buying?

Yes, it's on display at our Granville and Meadowbrook (QLD) showrooms, or call 1300 692 766 for guidance on choosing the right extractor.