This product is consist of top cover, top feeder drep box, PVC form partition and bottom plate.
Please see attched images with the descriptios and funtionality.
Embedded beehive entrances are also designed at the front and rear ends of the beehive base. Beekeepers can control as needed.
There are protective sleeves at the four beehive comers between, which can prevent bumps and rainwater infiltration, and it is also convenient to use hive tools to pry open the beehive.
The raised edge design of the protective cover reduces the contact area between the inner wall and the frame, making it easier for the beekeeper to take the frame.
Bottom plate slope design, to eliminate mites, pollen, rainwater and other waste, can reduce the chance of breeding bacteria.
Assembly Required
install #11 rotate beehive entrance to #5 bottom plate, both left and right are same.
2.Install #10 entrance to #2 deep box front plate with screw.
3.Install #1 & #2 plate to combine a deep box. You could identify the direction of the plate according to the text and pattern.
4. install the assembled deep box to #5 bottom plate, press it until they are fitted
5.Install #9 strip to the deep box with screw.
6. Install #7 feeder to the deep box, then install #8 strip on feeder
7. Insert #6 PVC partition to the slot of the deep box, then we could divide to 2 colonies
8. Install #14 cover to the feeder.
9.Put #12 lid on the hole,
Slope design to avoid sugar water retention in the middle.
Embedded beehive entrances are also designed at the front and rear ends of the beehive base. Beekeepers can control as needed.
