Small hive beetle traps and baits compared, including DE-CIDE, in-hive traps, Apithor and Topbait Plus

Small Hive Beetle Traps Compared: Bottom Board Traps, In-Hive Traps and Baits

Small hive beetle is the pest Australian beekeepers deal with most. The beetles themselves do little harm; it is their larvae, which tunnel through comb and ferment honey, that can collapse a weak colony in a week. Control works best when you attack the beetle at more than one point: as it enters, once it is inside, and in the soil where its larvae pupate.

Quick answer: a mesh bottom board with an oil tray is the foundation. Add one or two in-hive traps between the frames, an entrance barrier if beetle pressure is high, and treat the soil around the hive if you have had a larval outbreak. Strong colonies, reduced entrances and no empty space inside the hive do the rest.

Key takeaways

  • The beetle hides from bees in gaps and corners. Traps work by giving it a hiding place it cannot leave.
  • Bottom board trays catch beetles the bees chase down through the mesh.
  • In-hive traps sit between frames where bees corral beetles.
  • Soil treatment breaks the life cycle by stopping larvae pupating under the hive.

The five types of beetle control

Type Where it works Reusable? Example
Bottom board oil tray Under the mesh floor Yes 8/10 frame mesh bottom board with beetle trap
In-hive oil or DE trap Between frames Yes Beetle Jail traps, Beetle Barn
Disposable trap Between frames or on the floor No Apithor, disposable traps, set of 5
Entrance barrier At the entrance Yes Guardian entrance trap
Bait and soil treatment In traps; in the ground Consumable Topbait Plus, Temephos granule

Bottom board traps: start here

A mesh bottom board lets bees chase beetles down through the screen into a tray below, where a layer of vegetable oil or diatomaceous earth finishes them. Because it is part of the hive floor it works all day without the beekeeper doing anything, which is why it is the first thing to fit. Our 8/10 frame mesh bottom board has a slide-out tray and rubber feet, and the Hive Doctor smart bottom board adds a triple entrance disc so you can reduce the entrance without a separate reducer. Many of our complete hives, such as the OZ ARMOUR flat-pack hive with mesh bottom board, include the tray as standard.

Check and refresh the tray every inspection. A dry tray catches nothing, and a tray full of debris becomes a beetle nursery.

In-hive traps: between the frames

Bees herd beetles into corners and keep them there. An in-hive trap is a small plastic box with slots just big enough for a beetle and too small for a bee, filled with oil or diatomaceous earth, placed between two frames near the brood. Beetles running from the bees dive into the slots and do not come out.

Put one trap on each side of the brood nest. Two per box is usually enough in a strong colony.

Entrance barriers

An entrance barrier such as the Guardian trap fits at the hive entrance and uses a patented design to deter beetles as they try to walk in. It is a useful extra layer during the peak beetle months of summer and early autumn, particularly for smaller colonies that cannot guard a wide entrance. A metal entrance reducer does part of the same job by simply shrinking the doorway.

Baits and soil treatment

Topbait Plus is a bait designed for use with APIS-style beetle traps, which draws beetles into the trap rather than waiting for the bees to chase them. The other side of the life cycle is the ground: beetle larvae leave the hive, drop to the soil and pupate. The Temephos small hive beetle granule is applied to the soil around the hive to stop larvae pupating and emerging as the next generation. Follow the directions on the pack.

Traps are the second line of defence

No trap saves a weak colony. The beetle wins when there are more gaps than bees to guard them. Keep these in place and the traps will have far less to do:

  • Strong colonies. Combine or requeen weak ones rather than nursing them through summer.
  • No empty space. Do not add a super until the box below is nearly full.
  • Reduced entrances on small colonies.
  • Clean inspections. Burr comb, dropped honey and dead bees left in the hive feed larvae.
  • Hives in sun, off the ground, on a stand rather than damp soil.

For the beetle's biology and how to spot an outbreak early, see what you should know about the small hive beetle. All the products above are in our pests and varroa control collection.

Frequently asked questions

What is the best small hive beetle trap?

A mesh bottom board with an oil tray, because it works continuously without attention. Add in-hive traps between the frames for a second layer and an entrance barrier if pressure is high.

What do I put in a beetle trap?

Vegetable oil or diatomaceous earth for refillable traps such as Beetle Jail. Disposable traps come ready to use. Baits such as Topbait Plus are designed for specific trap styles; check the pack.

How many in-hive traps per box?

One each side of the brood nest, so two per box, is the usual arrangement. Add more if you are seeing beetles on every frame.

Do beetle traps harm bees?

The slots are sized so beetles can enter and bees cannot. Keep oil levels below the slot openings so bees cannot reach it.

Why am I still seeing beetles with traps in?

A few adult beetles in a strong hive are normal. The problem is larvae. If you see larvae in comb, the colony is too weak for the space it has: reduce space, strengthen the colony and treat the soil.

Back to blog