24 Frame Electric Honey Extractor

A Radial Electric Honey Extractor That Empties Both Sides of the Comb at Once

Extraction day is where a lot of the season's work either pays off or gets stuck. A small extractor that takes a few frames at a time turns a big harvest into a weekend of loading, spinning and flipping frames. A radial extractor works differently: the frames sit in the basket like spokes, so the honey is thrown out of both faces of the comb at once and there is no flipping. This one holds 24 frames, so a whole super or two goes through in a single run.

It is a motor-driven radial extractor with a 220V, 550W horizontal motor, variable speed and reversible rotation. The barrel is 201 stainless steel, 97cm across and 75cm high, with a 304 stainless steel inner basket measuring 42cm x 26cm. The motor does the spinning, so you can keep uncapping the next batch while a load runs.

Why Radial for 24 Frames

In a tangential extractor you spin one side of each frame, stop, flip and spin the other. A radial basket holds the frames with the top bars facing out, and honey leaves both sides of the comb together in one pass. That halves the handling and puts less stress on fresh comb, which matters when a frame is heavy and delicate. The large barrel gives the honey plenty of room to run down the walls to the bottom.

Variable Speed and Reversible Motor

Variable speed lets you start slowly while the frames are full and heavy, then build up as the honey comes out, which helps protect the comb from blowing out. The motor is also reversible, so you can spin the basket in the other direction to clear the cells more completely before you unload.

Honey Gate and Easy Assembly

A valve is fitted as the honey gate, so honey runs straight into a bucket or filter at the end of a run. Assembly is simple: three stainless steel legs fix to a holder under the barrel using large black screws that are easy to tighten. The kit includes the main barrel with motor, 3 legs, 6 screws, the holder, the valve, 2 lids and spare L-type screws.

Looking After It

Wash the barrel and basket with water and food-safe cleaner before first use, and clean and dry the extractor before storing with the lid on in a dry place. Unplug it before cleaning and keep water away from the motor and controls. Do not bump the barrel when moving it, since a dent can make the inner basket run unevenly, catch on the wall or let honey leak. Keep the spare parts somewhere safe, keep the lid closed while the basket is spinning, and keep children away from the extractor while it is in use.

Is Electric the Right Choice

An electric extractor suits sideline and small commercial beekeepers, and hobbyists with enough hives that hand-cranking 24 frames at a time becomes hard work. It needs a power supply where you extract, so it is best set up in a shed or honey room. If you only have a hive or two, or you extract at a site without power, a smaller manual extractor may suit you better.

Instruction Manual

Step-by-step assembly, care and storage instructions are in the manual: Download the 12 or 24 Frame Honey Extractor Manual (PDF). The manual covers both the manual and electric versions, so follow the motor and power sections for this model.

Specifications

• Type: 24 frame radial electric honey extractor
• Motor: horizontal motor, 220V, 550W
• Speed control: variable speed, reversible
• Barrel: 201 stainless steel, 97cm diameter, 75cm high
• Inner basket: 304 stainless steel, 42cm x 26cm
• Legs: 201 stainless steel, 3 legs with large black assembly screws
• Honey gate: valve supplied
• Lid: included
• In the box: main barrel with motor, 3 legs, 6 screws, holder, valve, 2 lids, spare L-type screws

How many frames does the extractor hold?

24 frames in a radial basket, so honey is thrown from both sides of the comb at once with no flipping.

Is it manual or electric?

Electric. It is driven by a 220V, 550W horizontal motor, so there is no hand-cranking.

Can I control the speed and direction?

Yes. The motor is variable speed and reversible, so you can start slowly with full frames, build up speed as they empty and spin in the other direction to clear the cells.

What is it made of?

A 201 stainless steel barrel and legs with a 304 stainless steel inner basket.

What size is the barrel?

97cm in diameter and 75cm high. The inner basket size is 42cm x 26cm.

What does radial mean?

The frames sit in the basket like spokes, so honey leaves both faces of the comb together in one pass and you do not have to flip frames.

Does it have a honey gate?

Yes. A valve is supplied as the honey gate, so honey runs straight into a bucket or filter.

How do I assemble it?

Fix the three legs to the holder under the barrel with the large black screws, then fit the valve. Follow the motor and power sections of the manual before first use.

What is in the box?

The main barrel with motor, 3 legs, 6 screws, a holder, a valve, 2 lids and spare L-type screws.

How do I clean and store it?

Unplug it first and keep water away from the motor and controls. Wash the barrel and basket with water and food-safe cleaner before first use, then clean and dry it and store with the lid on in a dry place.

Why should I avoid bumping the barrel?

A dent can make the inner basket run unevenly, catch on the barrel wall or let honey leak.